ACEM Talk 2025
On Saturday, 8 November 2025, the ACEM Talk for Practising Engineers 2025 was held at Hatten Hotel Melaka, drawing 18 practising engineers from across the industry. The half-day programme ran from 8.30 a.m. to 1.00 p.m., focusing on current developments, challenges, and practices within the consulting engineering sector. The event began with a welcome address […]
21st ACES-ACEM Dialogue
The annual dialogue between ACEM and its Singapore counterpart, Association of Consulting Engineers Singapore (ACES) was held on 8 November 2025 at the Hatten Hotel Melaka. This year’s meet marked the 21st instalment of the annual dialogue between the two Associations. Issues raised by ACEM for discussion were Digital Design Automation Platform (DDAP) and the […]
The Department of Irrigation and Drainage Sarawak : Stakeholder Engagement Session on Sarawak Urban Stormwater Management (SUStoM) Guideline
The Department of Irrigation and Drainage (DID) Sarawak conducted a stakeholder engagement session on the Sarawak Urban Stormwater Management (SUStoM) Guidelines on 5 November 2025 at Imperial Hotel, Kuching. The session was graced by Yang Berhormat Datuk Amar Prof. Dr. Sim Kui Hian, Deputy Premier and Minister for Public Health, Housing and Local Government Sarawak. […]
One-Day Seminar on “Sustainable & Resilient Solutions for Coastal & River Engineering”
On 4 November 2025, the ACEM Sarawak Branch hosted a one-day seminar titled “Sustainable & Resilient Solutions for Coastal & River Engineering” at Fifty-Six Hotel, Kuching. The seminar saw encouraging participation with sixty-three (63) attendees from various engineering organizations and agencies. The invited speakers for the event were Ir. Dr. Lee In (Perunding Maju Setia […]
Webinar on “PASSING PAE” BEM Outcome-Based Professional Assessment Examination (PAE)
On Tuesday, 4 November 2025, the “Passing PAE” webinar was successfully conducted via Zoom, with 80 participants joining the session. The programme catered to Graduate Engineers preparing for the Board of Engineers Malaysia (BEM) Outcome-Based Professional Assessment Examination, providing essential information and practical guidance ahead of their assessments. The webinar was delivered by Ir. K. […]
Three (3) days Induction Course for New Civil & Structural Engineers
The ACEM Sarawak Branch successfully organized a three-day Induction Course for New Civil & Structural Engineers from 21 to 23 October 2025 at the IEM Sarawak Branch Seminar Room, Isthmus Raintree Square, Kuching. A total of seventeen (17) engineers participated in the program. The course featured multiple lectures delivered by experienced practitioners, focusing on industry […]
ACEM Webinar Focuses on Efficient Wastewater Treatment and Water Reuse
The Association of Consulting Engineers Malaysia (ACEM) successfully organised a webinar titled “Wastewater Treatments Towards Water Reuse” on 22 October 2025 (Wednesday) via Zoom. The two-hour session, held from 10.00 a.m. to 12.00 noon, attracted 120 participants. The webinar discussed key challenges in wastewater treatment, focusing on energy efficiency and maintenance costs. Participants were introduced […]
ACEM Successfully Conducts CDM Professional and Coordinator Course
The Association of Consulting Engineers Malaysia (ACEM) successfully held the Construction Design & Management (CDM) – CDM Professional & CDM Coordinator Course from 14 to 16 October 2025, attended by 25 participants. The course featured a two-day physical session at Hotel Armada, Petaling Jaya, followed by an online session. Designed in line with the CDM […]
Half-Day Presentation on “BIM Adoption (Design, Verification & As-Built)”
Organised by the Association of Consulting Engineers Malaysia (ACEM) Sabah Branch, the half-day session on “BIM Adoption (Design, Verification & As-Built)” was held on 13 October 2025 at the IEM Sabah Training Centre, Damai, Kota Kinabalu. Presented by Mr. Razak Wong Chen Keng from Geodelta Systems Sdn. Bhd. , the session highlighted how 3D laser […]
Induction Course for new M&E Engineers
An Induction Course for New Mechanical and Electrical (M&E) Engineers was held from 22 to 24 September 2025, aimed at introducing young engineers to professional consulting engineering practice. The three-day programme provided participants with an overview of M&E design principles, consulting roles, and industry best practices, preparing them for further training in specialised areas. Throughout […]