One-Day Bentley Systems Hands-on Workshop, Geotechnical: Mitigating Risks in Soft Ground and Slopes Through Sound Geotechnical Analysis
Bentley Systems Singapore Pte Ltd, in collaboration with ACEM Sarawak Branch, organized a 4-day Bentley Systems Hands-on Workshop on 2 July, 7 July, 4 August, and 18 August 2026. The first workshop, titled “Geotechnical: Mitigating Risk in Soft Ground & Slopes through Sound Geotechnical Analysis,” was held on 2 July 2026 at the ACEM Sarawak […]
Congratulations on the Appointment of the President of the Board of Engineers Malaysia (BEM)
The Association of Consulting Engineers Malaysia (ACEM) extends its warmest congratulations to YBhg. Dato’ Ir. Ibrahim Bin Esa on his appointment as President of the Board of Engineers Malaysia (BEM). We wish YBhg. Dato’ every success in leading the engineering profession towards greater excellence, innovation, and sustainable development. May your leadership continue to strengthen the […]
ACEM Represents Consulting Engineers at SPAN’s Stakeholder Workshop on the Reclaimed Water Guidelines
On 30 July 2026, the Association of Consulting Engineers Malaysia (ACEM) took part in Bengkel Bersama Pemegang Taruh Berhubung Pembangunan Garis Panduan Air Pulih Guna, the Stakeholder Workshop on the Development of the Reclaimed Water Guidelines, organised by the National Water Services Commission (Suruhanjaya Perkhidmatan Air Negara, SPAN) at Hotel DoubleTree by Hilton Putrajaya. The […]
ACEM Attends Engagement Session on the Proposed Review and Reform of Malaysia’s Contract Law
On 24 July 2026, the Association was invited to attend an engagement session on the proposed review and reform of contract law in Malaysia. During the session, the Committee for the Review and Reform of Contract Law in Malaysia (CRRCL) presented its findings and recommendations for reforming the Contracts Act 1950 (Act 136). This note […]
ACEM Webinar Series: Site Supervision Course Discipline Module – Electrical
ACEM successfully conducted the Site Supervision Course (SSC) – Electrical Discipline Module webinar series from 6 June to 25 July 2026, held on Saturdays from 10:00 a.m. to 12:30 p.m. Introduced in 2016, the Site Supervision Course was developed to enhance the competency and technical knowledge of Inspectors-of-Works (IOWs) and Site Supervisors, who serve as […]
Forensic Engineering in Project Management: Learning from Failure to Build a More Resilient Future
Project management has traditionally focused on delivering projects within the constraints of scope, time, cost, quality, risk and stakeholder expectations. However, the increasing complexity of infrastructure and construction projects has elevated another discipline into strategic importance, namely forensic engineering. Rather than viewing forensic engineering as an activity that begins only after a catastrophic failure, modern […]
Webinar on “Passing PAE” (BEM Outcome-Based Professional Assessment Examination), July 2026
On Tuesday, 7 July 2026, ACEM successfully hosted its “Passing PAE” webinar via Zoom from 10:00 a.m. to 1:00 p.m., with the participation of 58 Graduate Engineers. Designed to support engineers preparing for the Board of Engineers Malaysia (BEM) Outcome-Based Professional Assessment Examination (PAE), the webinar provided valuable guidance on the examination process and expectations. […]
Half day talk on “Next Generation Building Materials: Self-Healing Durability and Anti-Microbial Innovation” on 24 June 2026
ACEM Sarawak Branch, in collaboration with United GI Products (Sarawak) and Yieh Phui Enterprise Co. Ltd., Taiwan, organized a half-day technical talk titled “Next Generation Building Materials: Self-Healing Durability and Anti-Microbial Innovation” on 24 June 2026 at Fifty Six Hotel, Kuching. The talk was delivered by Mr. Jason Huang from Yieh Phui Enterprise Co. Ltd., […]
Webinar on Assessment and Design of Post-installed Fastenings to MS EN1992-4
The ACEM webinar on “Assessment and Design of Post-installed Fastenings to MS EN 1992-4” was held on 26 May 2026 via Zoom with the participation of 42 attendees. The session covered the essentials of post-installed fastening design to Malaysian Standards MS EN 1992-4, including regulatory frameworks, qualifications, design considerations, installation requirements, and real-world applications. Participants […]
Induction Course for New C&S Engineers
On 18 to 20 May 2026, ACEM held the Induction Course for new C&S Engineers at Hotel Armada Petaling Jaya with a total of 26 participants. The physical course introduced Professional C&S Consulting Engineering Service to new C&S Engineers and guided civil and structural engineers to further enhance skills in the engineering design environment. The […]